STICKING PLASTER CRACKED
STICKING PLASTER PATCH

Always undertake a test first on a small unobtrusive area.When removing, proceed with care and be aware that wallpaper may be acting as a support to defective plaster underneath. Wallpapers, paints and other finishes can spoil the appearance of plaster surfaces and may trap moisture. Where the bond with laths has failed, reinforce by pouring fresh plaster from above and strengthening with a jute scrim set into this and secured to the joists.Always use screws for any fixings to avoid vibrations to fragile ceilings.Investigate from above if access is available from a loft or by carefully lifting floorboards.

Problems with ceilings frequently result from the plaster bond having failed, structural movement, failure of joists, damp problems and rotten or beetle-infested laths.

STICKING PLASTER CRACKED

Removing a loose section of old lime plaster Mending sagging or cracked ceilings Alternatively, gypsum may sometimes be added to a lime plaster mix for the same purpose.

STICKING PLASTER PATCH

To patch repair plasterwork, slightly treat the exposed edges of the existing plaster with water or diluted PVA (one part to 10 of water) to control suction and prevent cracking.

Cracks and pockmarks may be filled using matching plaster, or narrow ones with proprietary interior filler gauged with whiting.

Make necessary repairs with appropriate traditional materials.

Consult a structural engineer if in any doubt.

Monitor cracks over a period of time by marking and dating their end point on the wall.

Investigate bulges or anything larger than a hairline crack.

Rake out thin cracks and fill with a good filler.

Some cracks and bulges in plaster may be superficial or localised others result from failure of the masonry or timber beneath, or may indicate wider structural problems within the building.

Inappropriate modern plasters and finishes.

DIY: Make plastering walls an easy job with our guide.

Rotten laths can result in plaster sagging or bowing. Hansaplast Noise Stop are earplugs for hearing protection.In the case of stud walls and ceilings, timber laths are fixed between the studs or joists and the plaster is pushed through the gaps between the laths. with the animated characters launched the company's new SilverHealing plasters. On 4 July 2005 Elastoplast launched a £1.1 million advertising campaign which introduced brand heroes called 'the Plastermen'. The plasters were sold in small flat tin.

In the 1970s Elastoplast marketed its Airstrip product as 'the fresh air plaster'. Nick Kochan wrote about Elastoplast in his book The World's Greatest Brands (1996) noting that 'the early success of the brand was due to its high-stretch fabric material coupled with an effective adhesive' and that it has as strong position in worldwide markets, particularly in the UK. A third trademark, named Curitas, is used in parts of Latin America. In some countries in Europe Hansaplast, a brand name started by Beiersdorf in 1922, is used instead. It has become a genericized trademark for 'sticking plaster' in some Commonwealth countries including the United Kingdom and Australia. In 1928 Smith & Nephew of the UK acquired the licence to market and produce the Elastoplast range of bandages.īeiersdorf bought brand rights for the Commonwealth from Smith & Nephew in 1992. Elastoplast is a brand of adhesive bandages (also called sticking plasters) and medical dressings made by Beiersdorf.

Sticking plaster